Reconcile Acquisition Consideration With Cash Paid Using Claude and FMP MCP

Synopsys disclosed $34.86 billion in purchase consideration for Ansys. Its fiscal 2025 cash-flow statement reported $16.68 billion in acquisitions, net of cash acquired. Put those figures beside each other, and a straightforward question follows: where did the difference go?

Much of the consideration was noncash. Synopsys issued shares and assumed equity awards, while the cash-flow line deducts the cash acquired with the business. To compare the amounts properly, start with the cash consideration disclosed in the acquisition note and work toward the reported cash outflow.

This walkthrough uses Claude and FMP MCP to make that comparison. The Ansys example comes within $188,000 of the reported acquisition line, but it also exposes two unanswered questions and a separate discrepancy in FMP's standardized data. The worked example comes first; the complete prompts and setup instructions follow so you can reproduce it.

Key takeaways

  • Start with disclosed cash consideration. Total purchase consideration includes components that do not represent cash paid.
  • Keep the unexplained difference visible. A close numerical match does not resolve uncertain classifications or establish which payments a cash-flow line contains.
  • Check standardized fields against the filing. In this run, FMP's acquisitionsNet differed from the filing's acquisition line by $790.8 million.

Start by checking the cash-flow field

The November 12, 2026 run returned -$15.89 billion for FMP's acquisitionsNet field. Check that figure against the filing before treating it as cash paid for Ansys. Table 1 records it alongside the other investing and financing fields needed for the comparison.

Table 1. FMP fiscal 2025 investing and financing fields and the Ansys M&A record (USD thousands)

Item

Value

Source

date (fiscal period end)

2025-10-31

FMP cashflow-statement

filingDate

2025-12-22

FMP cashflow-statement

acceptedDate

2025-12-22 00:00:00

FMP cashflow-statement

acquisitionsNet

-15,890,428

FMP cashflow-statement (-15,890,428,000 USD)

investmentsInPropertyPlantAndEquipment

-169,454

FMP cashflow-statement (-169,454,000 USD)

purchasesOfInvestments

-69,808

FMP cashflow-statement (-69,808,000 USD)

salesMaturitiesOfInvestments

218,786

FMP cashflow-statement (218,786,000 USD)

otherInvestingActivities

-365

FMP cashflow-statement (-365,000 USD)

netCashProvidedByInvestingActivities

-15,911,269

FMP cashflow-statement (-15,911,269,000 USD)

netDebtIssuance

13,465,703

FMP cashflow-statement (13,465,703,000 USD)

commonStockIssuance

228,418

FMP cashflow-statement (228,418,000 USD)

otherFinancingActivities

-308,364

FMP cashflow-statement (-308,364,000 USD)

netCashProvidedByFinancingActivities

13,385,757

FMP cashflow-statement (13,385,757,000 USD)

targetedCompanyName

ANSYS, Inc.

FMP search-mergers-acquisitions

transactionDate

2024-03-13

FMP search-mergers-acquisitions

acceptedDate

2024-03-13 21:48:33

FMP search-mergers-acquisitions

link

View Form S-4 filing

FMP search-mergers-acquisitions

The M&A record also needs a date check. Its March 13, 2024 entry links to a Form S-4, so it does not establish when the deal closed. The next step uses the 10-K to confirm completion and examine the cash payment itself.

Separate cash consideration from the rest of the deal

Synopsys' fiscal 2025 Form 10-K places the Ansys completion on July 17, 2025, within the year ended October 31, 2025. That puts the closing and the cash-flow comparison in the same reporting window.

The filing also supplies the units used in the calculations. Amounts below are in USD thousands unless stated otherwise. Source labels refer to the cash-flow statement (CF), Business Combinations note (BC), its Additional Information table (BCD), and debt note (DN).

Table 2. Reporting window, units and scope

Item

Finding

Source

Completion date

July 17, 2025 (Reported)

BC, "Fiscal 2025" paragraph: "On July 17, 2025, we completed our acquisition of Ansys"

Reporting window

12 months ended Oct. 31, 2025 (Reported)

CF column header "12 Months Ended", "Oct. 31, 2025"

Stated unit, cash-flow statement

The heading states USD and "in Thousands"

CF heading

Stated unit, purchase consideration table

"(in thousands)"

BC table heading

Stated unit, BCD

Heading "USD", no scale stated. Treated as full dollars for 34,858,480,000 and 17,613,185,000 only, because both appear in the BC table as 34,858,480 and 17,613,185 in thousands. 267,100,000 has no matching stated-unit table: Not stated.

BCD heading

Stated unit, DN

Borrowings table "Amount (in thousands)"; details heading in thousands. Narrative figures are in "billion" or "million" as written.

DN tables and text

Acquisitions reported for fiscal 2025

One: Ansys (Reported). The Regulatory Divestitures are dispositions.

BC, "Fiscal 2025"

Scope of the acquisition line

Scope unresolved (see Table 4)

CF line "Acquisitions, net of cash acquired"

The consideration table separates the purchase into four components. Stock and assumed equity awards explain much of the gap between the $34.86 billion total and the amount paid in cash. The $8.8 million settlement needs different treatment because the filing does not state whether it was cash or noncash.

Table 3. Ansys purchase consideration components (USD thousands, outflows positive)

Component

Amount

Cash or noncash

Payment timing

Source

Cash for outstanding Ansys Common Stock

17,613,185

Cash (Reported). Footnote (1): "total cash paid to settle 88.1 million outstanding shares"

Not stated

BC table, line "Cash for outstanding Ansys Common Stock(1)"

Fair value of Synopsys Common Stock issued

17,105,538

Noncash (Reported). CF "Non-cash activities": "Issuance of common stock for the acquisition of Ansys", 17,105,538

Not stated

BC table, footnote (2); CF Non-cash activities

Fair value of assumed Ansys equity awards (pre-combination services)

130,963

Noncash (Reported). CF "Non-cash activities": "Fair value of replacement equity awards in connection with the acquisition of Ansys", 130,963

Not stated

BC table, footnote (3); CF Non-cash activities

Settlement of pre-existing relationships

8,794

Not stated (Classification unresolved)

Not stated

BC table, line "Settlement of pre-existing relationships"

Sum check

34,858,480 against the stated "Total purchase consideration" of 34,858,480; difference 0 (Calculated)

n/a

n/a

BC table, line "Total purchase consideration"

Deduct the cash acquired

The bridge starts with $17,613.185 million of disclosed cash consideration. Subtracting $931.740 million of acquired cash produces a net outflow of $16,681.445 million. The reported acquisition outflow is $16,681.257 million, leaving it $188,000 below the calculation.

Tables 4a and 4b keep the amounts, sources and open items together. Outflows are positive here to make the subtraction easier to follow; the later field comparisons retain the cash-flow statement's negative signs.

Table 4a. Cash bridge: amounts and status (USD thousands, outflows positive)

Line

Amount

Classification

Payment timing

Status

Disclosed cash consideration

17,613,185

Cash

Not stated

Reported

Cash acquired (deducted)

931,740

n/a

Not stated

Reported

Calculated net cash outflow

16,681,445

Cash

Not stated

Calculated

Reported acquisition outflow

16,681,257

Cash flow line

Not stated

Reported

Residual (reported - calculated)

-188

n/a

n/a

Residual retained

Settlement of pre-existing relationships

8,794

Not stated

Not stated

Classification unresolved

Scope of the line

n/a

n/a

n/a

Scope unresolved

Table 4b. Cash bridge: sources and notes

Line

Source

Note

Disclosed cash consideration

BC table

Starting point taken from the note

Cash acquired (deducted)

BC table, "Less: cash acquired"

Printed as (931,740)

Calculated net cash outflow

17,613,185 - 931,740

Reported acquisition outflow

CF "Acquisitions, net of cash acquired"

Printed as -16,681,257

Residual (reported - calculated)

Calculated

Cause not disclosed

Settlement of pre-existing relationships

BC table

Scenario residual: 16,681,257 - (16,681,445 + 8,794) = -8,982. No scenario chosen.

Scope of the line

See the scope list below

The filing does not explain the $188,000 difference. Keep it as a residual, the amount left after comparing the reported and calculated outflows. Do not add an unsupported balancing amount to make the figures agree.

Keep two unanswered questions separate

  • Was the settlement paid in cash? The filing does not state whether or when the $8.8 million settlement was paid in cash. Including it would change the residual to -$8.982 million. That is a scenario, not evidence for its classification.
  • Does the acquisition line contain only Ansys payments? The note names Ansys as the year's acquisition, but it does not rule out payments for earlier deals, deferred consideration or other acquisition-related amounts. The line's scope therefore remains unresolved.

The scope list records the filing's limits:

  • Other fiscal 2025 acquisitions: Not disclosed; the note names only Ansys.
  • Payments for earlier acquisitions: Not disclosed.
  • Deferred or contingent consideration for Ansys: Not disclosed.
  • Other acquisition-related amounts in the line: Not disclosed.

Check acquisitionsNet against the filing

The cash bridge comes close to the filing's acquisition line, but FMP's acquisitionsNet is $790.8 million away from that same line. Using it as the Ansys payment would therefore change the result materially.

Table 5 tests whether filing lines not accounted for by the other compared FMP fields add up to the difference. Building-sale proceeds, divestiture proceeds and the redemption of redeemable non-controlling interest produce an exact arithmetic match.

Table 5. Filing lines outside the field mapping and the difference test (USD thousands, signs as printed)

Line

Amount

Filing section

Role in the difference test

Source

Acquisitions, net of cash acquired

-16,681,257

Investing

Excluded by rule; subtracted from acquisitionsNet

CF

Proceeds from sale of building

74,279

Investing

Not accounted for by another FMP field; included in the test

CF

Proceeds from business divestitures, net of cash divested

746,550

Investing

Not accounted for by another FMP field; included in the test

CF

Redemption of redeemable non-controlling interest

-30,000

Financing

Not accounted for by another FMP field; included in the test

CF

FMP acquisitionsNet

-15,890,428

n/a

n/a

Table 1

acquisitionsNet minus filing acquisition line

790,829 (Calculated)

n/a

n/a

-15,890,428 - (-16,681,257)

Sum of the three lines above

790,829 (Calculated)

n/a

n/a

74,279 + 746,550 - 30,000

Difference between those two

0 (Calculated)

n/a

n/a

That match does not establish how FMP builds acquisitionsNet. The redemption is particularly relevant: the filing places the $30 million payment in financing activities, while acquisitionsNet is an investing field. Its presence in the calculation is a reason to investigate, not proof of the field's construction.

Compare the rest of the statement

The other compared component fields match filing amounts arithmetically. The section totals do not: FMP's investing total is $30 million below the filing's, and its financing total is $30 million above.

Those differences equal the redemption amount, but this run does not establish a causal relationship. Tables 6a through 6c preserve the comparisons and the filing lines behind them, with all differences calculated as FMP value minus filing amount.

Table 6a. Investing fields (USD thousands, difference = FMP minus filing)

FMP field

FMP value

Filing amount

Difference

acquisitionsNet

-15,890,428

-16,681,257

790,829

investmentsInPropertyPlantAndEquipment

-169,454

-169,454

0

purchasesOfInvestments

-69,808

-69,808

0

salesMaturitiesOfInvestments

218,786

218,786

0

otherInvestingActivities

-365

-365

0

netCashProvidedByInvestingActivities

-15,911,269

-15,881,269

-30,000

Table 6b. Financing fields (USD thousands, difference = FMP minus filing)

FMP field

FMP value

Filing amount

Difference

netDebtIssuance

13,465,703

13,465,703

0

commonStockIssuance

228,418

228,418

0

otherFinancingActivities

-308,364

-308,364

0

netCashProvidedByFinancingActivities

13,385,757

13,355,757

30,000

Table 6c. Filing lines behind each FMP field

FMP field

Filing lines that equal it

acquisitionsNet

Acquisitions, net of cash acquired (compared, not an equal match)

investmentsInPropertyPlantAndEquipment

Purchases of property and equipment, net

purchasesOfInvestments

Purchases of short-term investments (-65,708) + Purchases of strategic investments (-4,100)

salesMaturitiesOfInvestments

Proceeds from maturities of short-term investments (58,016) + Proceeds from sales of short-term investments (157,204) + Proceeds from sales of strategic investments (3,566)

otherInvestingActivities

Other

netCashProvidedByInvestingActivities

Net cash provided by (used in) investing activities

netDebtIssuance

Proceeds from debt, net of issuance costs (14,329,340) + Repayment of debt (-863,637)

commonStockIssuance

Issuances of common stock

otherFinancingActivities

Payments for taxes related to net share settlement of equity awards (-305,501) + Other (-2,863)

netCashProvidedByFinancingActivities

Net cash provided by (used in) financing activities

For this reconciliation, the filing's acquisition line remains the comparison point. Keep the standardized-field discrepancy visible and rerun the check when refreshing the data. The same approach helps when reconciling changes in a company's cash balance.

Keep funding and transaction costs outside the bridge

How Synopsys funded the acquisition is a separate question from how much consideration it paid. Senior Notes, a term loan and cash on hand supplied funding; those sources do not become additional purchase consideration.

The filing also reports $267.1 million of expensed transaction costs, described as primarily related to the Ansys merger. It does not give an Ansys-only amount. Table 7 keeps these costs, funding details and the absence of a disclosed assumed-debt line separate from the bridge.

Table 7. Assumed debt, transaction costs, funding and commitments (USD thousands where stated in thousands)

Item

Finding

Status

Source

Assumed debt

The allocation table reports no assumed-debt line

Not disclosed

BC allocation table

Transaction costs

USD 267.1 million (267,100 thousand) in fiscal 2025, "primarily related to the Ansys Merger", expensed as incurred. The Ansys-only amount is not given. The pro forma transaction costs of USD 298.4 million are a separate, unaudited pro forma adjustment.

Reported

BC, "Transaction Costs" paragraph; BC pro forma paragraph

Funding source: Senior Notes

USD 10.0 billion principal (10,000,000 thousand), proceeds of approximately USD 9.9 billion (9,900,000 thousand) after a discount of USD 17.0 million and issuance costs of USD 70.2 million. Used for a portion of the cash consideration and related transaction fees and expenses.

Reported

DN, "Senior Notes"

Funding source: Term Loan

The full USD 4.3 billion (4,300,000 thousand) was borrowed on July 17, 2025, to fund a portion of the cash consideration and transaction fees, premiums and expenses

Reported

DN, "Term Loan"

Funding source: cash on hand

Named as a source; amount not given

Not disclosed

BC, "Fiscal 2025" paragraph

Financing commitment terminated

Bridge Commitment reduced by USD 1.1 billion (1,100,000 thousand) to USD 10.6 billion (10,600,000 thousand) on Oct. 3, 2024, and by USD 9.9 billion (9,900,000 thousand) on Mar. 17, 2025. On the Acquisition Date the remaining Bridge Commitment of approximately USD 690.0 million (690,000 thousand) was terminated, reducing it to zero.

Reported

DN, "Bridge Commitment"

Record the filing source without overstating what it proves

The final check records the filing links and timestamps listed by FMP's SEC filings feed. Table 8 identifies the 10-K and the 8-K filed on July 17, 2025. The 8-K was not opened in this run, so its listed date does not independently verify completion or any amount in the bridge.

Table 8. Filings listed by FMP's SEC filings feed

Field

Fiscal 2025 Form 10-K

Form 8-K filed July 17, 2025

formType

10-K

8-K

filingDate

2025-12-22 00:00:00

2025-07-17 00:00:00

acceptedDate

2025-12-19 21:37:00

2025-07-17 09:05:43

link

View 10-K filing index

View 8-K filing index

finalLink

View Form 10-K

View Exhibit 99.1

Comparison with Table 1

filingDate: Matches (Table 1 shows 2025-12-22; the feed adds 00:00:00). acceptedDate: Differs (Table 1 shows 2025-12-22 00:00:00).

Not applicable

The two FMP records agree on the 10-K's filing date, December 22, 2025, but carry different acceptance timestamps. The feed does not state its timestamp time zone, so the difference is retained rather than treated as a verified measure of when the filing became public. That timing question belongs in an as-of-date fundamental screen.

Run the reconciliation in Claude

The prompts below reproduce the example in one conversation. Start by connecting the FMP MCP server through Claude's Settings, Connectors, Add custom connector. Replace YOUR_FMP_API_KEY in this URL with your API key:

https://financialmodelingprep.com/mcp?apikey=YOUR_FMP_API_KEY

FMP also describes an official Claude connector available through the connector directory with a sign-in. Keep web search off for this workflow: the prompts use only FMP's data and filing responses. The example was run on November 12, 2026; later records may differ.

Data used by the prompts

The Cash Flow Statement API supplies standardized fields, while the Financial Reports Form 10-K JSON API supplies the statements and notes used to build the bridge. The operation map keeps the parameters and their outputs together.

MCP operation and parameters

Used for

Feeds

cashflow-statement (statements tool) symbol=SNPS, period=annual, limit=1

Standardized investing and financing fields for fiscal 2025

Tables 1 and 6

search-mergers-acquisitions (company tool) name=Synopsys

FMP's record of the Ansys transaction

Table 1

financial-reports-form-10-k-json (statements tool) symbol=SNPS, year=2025, period=FY

Business Combinations note, consolidated statements of cash flows, non-cash activities

Tables 2 to 7

search-by-symbol (secFilings tool) symbol=SNPS, from_date=2025-12-15, to_date=2025-12-31, limit=50

The feed's entry for the 10-K: filing URL, filing date, acceptance timestamp

Table 8

search-by-symbol (secFilings tool) symbol=SNPS, from_date=2025-07-15, to_date=2025-07-21, limit=50

The feed's entry for the Form 8-K filed on July 17, 2025

Table 8

Calculation and status reference

The prompts start from explicitly disclosed cash consideration, subtract acquired cash, and compare the result with the reported outflow. They check source units before converting amounts and use a separate scenario for any component whose cash treatment is unstated.

Line

Calculation or source

Where it is used

Purpose

Disclosed cash consideration

"Cash for outstanding Ansys Common Stock" in the Business Combinations note, which the note's footnote describes as the total cash paid for the shares

Table 4

The cash paid for the target

Cash acquired

Target cash at the acquisition date, from the consideration table

Table 4

Deducted because the cash-flow line is net of it

Calculated net cash outflow

Disclosed cash consideration - cash acquired

Table 4

The transaction's expected cash-flow amount

Reported outflow

"Acquisitions, net of cash acquired" in the cash-flow statement

Table 4

The compared figure

Residual

Reported outflow - calculated net cash outflow

Table 4

The amount the disclosures do not explain

Scenario residual

Reported outflow - (calculated net cash outflow + a component's amount), for a component with no stated classification

Table 4

Shows what treating the component as cash paid within the line would do, without choosing

These status labels distinguish reported facts from calculations and unanswered questions. A missing disclosure is not treated as zero, and an unresolved classification is not resolved by choosing whichever treatment makes the numbers closest.

Label

Rule

Reported

A figure taken as printed in the 10-K response or returned by FMP

Calculated

A figure computed from reported figures

Residual retained

A non-zero residual the disclosures do not explain, kept as reported

Classification unresolved

A component whose cash or noncash treatment, or payment timing, the filing does not state

Scope unresolved

The filing does not establish that the compared line contains only the selected transaction

Not disclosed

A component the filing does not report; never treated as zero

Prompt 1: Record FMP's cash-flow fields and deal record

Run this first to collect the standardized fields and M&A record used in Table 1. It records what FMP returns before the filing comparison begins.

Using Financial Modeling Prep through the connected FMP MCP server, start an acquisition consideration review for Synopsys (SNPS) and its acquisition of Ansys.

Objective

Record FMP's standardized fiscal 2025 investing and financing fields and FMP's record of the Ansys transaction. Do not interpret them yet.

Data rules

- Use the FMP statements tool, endpoint cashflow-statement, symbol SNPS, period annual, limit 1. If fiscal 2025 is not returned, raise the limit until it is.

- Use the FMP company tool, endpoint search-mergers-acquisitions, name Synopsys.

- FMP returns whole dollars. Divide by 1,000 and report in USD thousands, and state the unit you converted from.

- Do not use filings or web search in this step.

- Retry a failed request once; report Unavailable if still missing.

Steps

1. Record date, filingDate, acceptedDate, acquisitionsNet, investmentsInPropertyPlantAndEquipment, purchasesOfInvestments, salesMaturitiesOfInvestments, otherInvestingActivities, netCashProvidedByInvestingActivities, netDebtIssuance, commonStockIssuance, otherFinancingActivities and netCashProvidedByFinancingActivities. Report acceptedDate exactly as returned.

2. From the M&A search, record the Ansys row: targetedCompanyName, transactionDate, acceptedDate and link. Report both dates exactly as returned.

Output

Start with a short run summary: run date, operations called, limitations.

Table 1: Item | Value | Source

After the table, state in one sentence what the M&A record's date refers to, judging only from its link.

Prompt 2: Build the bridge from the 10-K

Continue in the same conversation. This prompt produces Tables 2 to 7, including the consideration components, cash bridge, field comparisons and open items. It preserves the filing's evidence rather than asking Claude to force a match.

Continue the SNPS-Ansys review using the fiscal 2025 Form 10-K and Table 1.

Objective

Bridge the cash consideration disclosed for Ansys to the reported acquisition cash outflow, keep unresolved items visible and separate from the residual, and compare FMP's investing and financing fields with the filing as arithmetic comparisons only.

Data rules

- Call the FMP statements tool, endpoint financial-reports-form-10-k-json, symbol SNPS, year 2025, period FY, and confirm from the cover data that it is the 10-K for the period ended October 31, 2025. Retry a failed request once; report Unavailable if still missing.

- Use only that response and Table 1. Do not use web search, any other filing or the SEC filings feed.

- Cite each source by table or section name and by footnote or line label. If the response gives no filing URL, say so once and do not supply one.

- Units: before using a figure, quote the unit stated in its table heading (for example "in Thousands"). If a heading states no unit, treat the amounts as full dollars only where the same figure appears in a table with a stated unit; otherwise mark the unit Not stated. Report every amount in USD thousands.

- Signs: in Tables 3 and 4 show outflows as positive amounts and say so. In Tables 5 and 6 keep the sign printed in the cash-flow statement, with outflows negative. Every difference is FMP value minus filing amount.

- Start the cash comparison from the cash consideration the note states. Do not derive it by subtracting other components from total consideration. A sum check of the components against the total is allowed and is not the bridge.

- Classify a component as cash or noncash only where the filing states it. Otherwise mark it Not stated, keep it out of the cash comparison and show its effect as a scenario. A smaller residual under one scenario is not evidence for a classification.

- Do not force the transaction amount to match the cash-flow line. Keep any residual and state whether its cause is disclosed.

- A component the filing does not report is Not disclosed, not zero.

- Do not state or imply how FMP builds any field. Report what matches arithmetically and mark the mapping Not confirmed. Do not call a match an explanation of an FMP field.

Steps

1. Record the completion date, the fiscal year and its length, and every acquisition the Business Combinations note reports for fiscal 2025, with the unit of each source table you use, quoted from its heading.

2. List each consideration component with amount, cash or noncash classification, payment timing and source. Give classification and timing only as the filing states them; otherwise write Not stated. Add a sum check of the components against the total purchase consideration.

3. Bridge: disclosed cash consideration - cash acquired = calculated net cash outflow. Compare it with the cash-flow line "Acquisitions, net of cash acquired". Residual = reported outflow - calculated net cash outflow.

4. Scenarios: for each component marked Not stated, scenario residual = reported outflow - (calculated net cash outflow + the component's amount). Show the result without choosing a scenario.

5. Scope of the line: state what the response says about each of these, writing Not disclosed where it is silent: other acquisitions completed in fiscal 2025; payments for acquisitions completed earlier; deferred or contingent consideration; other acquisition-related amounts in the line. State whether the response establishes that the line contains only the Ansys payments. Do not infer that from silence.

6. Report assumed debt, transaction costs and funding sources only where the response discloses them, with each amount in the unit the response states and in USD thousands. Write Not disclosed where it is silent.

7. Compare FMP's fields with the filing's cash-flow lines:

a. For each FMP investing and financing field in Table 1 other than acquisitionsNet and the two net totals, give the filing line or lines in the same section whose amounts, alone or summed, equal it, and the difference. Ignore filing lines whose fiscal 2025 value is zero.

b. Compare each FMP net total with the filing's net investing and net financing totals and give the difference.

c. List every nonzero filing line, in either section, that no field in (a) accounts for, other than the filing's acquisition line. Give each line's section and quote what the response says about it, or write Not disclosed.

d. Compute acquisitionsNet minus the filing's acquisition line, and the sum of the lines listed in (c), and report whether they are equal. State that the lines in (c) were selected because no other field accounts for them. Do not infer how acquisitionsNet is built.

e. Quote the sentence in the response that describes the redemption of redeemable non-controlling interest, and state the cash-flow section where the filing reports it. Do not state how it relates to the differences in (b) unless the response says so.

8. Label every status with exactly one of: Reported, Calculated, Residual retained, Classification unresolved, Scope unresolved, Not disclosed.

Output

Table 2: Item | Finding | Source

Rows: completion date | reporting window | stated unit of each source table, quoted from its heading | acquisitions reported for fiscal 2025 | scope of the acquisition line

Table 3: Component | Amount (USD thousands) | Cash or noncash | Payment timing | Source Include the sum check as a final row.

Table 4: Line | Amount (USD thousands) | Classification | Payment timing | Status | Source | Note

Rows: disclosed cash consideration | cash acquired | calculated net cash outflow | reported acquisition outflow | residual | each component marked Not stated, with its scenario residual in the Note column | scope of the line

Table 5: Line | Amount (USD thousands) | Filing section | Accounted for by another FMP field | In the difference test | Source

Rows: the filing's acquisition line | each line listed in step 7c | FMP acquisitionsNet | acquisitionsNet minus the filing's acquisition line | sum of the 7c lines | difference between those two

Table 6: Section | FMP field | FMP value (USD thousands) | Filing lines that equal it | Filing amount (USD thousands) | Difference

Rows: one per FMP investing and financing field in Table 1, including the two net totals.

Table 7: Item | Finding | Status | Source

Rows: assumed debt | transaction costs | funding sources | any financing commitment the response says was terminated

After the tables, quote the sentence from step 7e. Then state the residual and the status of each open item in at most three sentences. Do not assess deal value, synergies or goodwill.

Prompt 3: Record the filing links and timestamps

Run this last to produce Table 8. It records the feed's filing identifiers without opening the documents or using their contents to change the bridge.

Continue the SNPS-Ansys review using Table 1.

Objective

Record the filing URL, filing date and acceptance timestamp that FMP's SEC filings feed lists for the Synopsys fiscal 2025 Form 10-K and for the Form 8-K filed on July 17, 2025. Do not interpret the bridge.

Data rules

- Use the FMP secFilings tool, endpoint search-by-symbol, symbol SNPS, from_date 2025-12-15, to_date 2025-12-31, limit 50. Keep only rows with formType 10-K.

- Use the same endpoint and symbol with from_date 2025-07-15, to_date 2025-07-21, limit 50. Keep only rows with formType 8-K.

- If more than one row is kept for a filing, list every one and do not pick among them.

- Report every date and timestamp exactly as returned.

- Do not open any link. Do not use web search or any filing content.

- Retry a failed request once; report Unavailable if still missing.

Steps

1. Record for each kept row: formType, filingDate, acceptedDate, link and finalLink.

2. For the 10-K row, compare filingDate and acceptedDate with the filingDate and acceptedDate in Table 1 and report Matches or Differs for each.

3. Count the rows returned but not kept, by formType, for each of the two requests.

Output

Start with a short run summary: run date, operations called, retries.

Table 8: Filing | formType | filingDate | acceptedDate | link | finalLink | Comparison with Table 1 Write Not applicable in the last column for the 8-K row.

After the table, state the counts from step 3 in one sentence, then state in one sentence what the 8-K row does and does not establish.

Apply the method to another acquisition

Replace the company, filing year and date windows in the prompts. Check the actual reporting period, especially when fiscal periods differ between sources. Earn-outs and deferred payments need particular attention because a later year's acquisition line may include payments for an earlier deal.

Before using the result in a model, flag any of these conditions for analyst review:

  • The cash-flow line covers multiple deals or its contents remain unclear.
  • Cash acquired is missing, or a component's cash classification or payment timing is unstated.
  • A source unit cannot be established, or a field discrepancy remains unexplained.

Read the relevant note and, where it is silent, the completion filing before reusing the affected figure. For Ansys, that means keeping the $188,000 residual, settlement question and uncertain line scope visible alongside the standardized-field discrepancy.

Use the Latest Mergers and Acquisitions API to find candidate transactions, then confirm closing from the underlying filing. The useful output is a cash bridge another analyst can trace, with the remaining questions clearly identified.

About the Author
Pranjal Saxena

Financial APIs, Claude MCP, and AI-driven research workflows

Pranjal Saxena writes technical content focused on financial data APIs, Claude MCP workflows, AI-driven research systems, and Python-based market analysis. For FMP, his work centers on turning structured financial data into practical, workflow-driven content for developers, analysts, and fintech teams. He combines experience in data science, NLP, generative AI, and financial API workflows to show how APIs, automation, and AI-assisted systems can support modern financial research and analysis.

Related

Financial data for every need

Real-time quotes and 30+ years of historical data, including prices, fundamentals, and insider transactions — all accessible via API.

Create Free Account